A critical state model for sands dependent on stress and density     

Y.P. Yao  D.A. Sun  T. Luo 《国际地质力学数值与分析法杂志》2004,28(4):323-337

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

渤海新近系浅水三角洲沉积体系与大型油气田勘探   总被引：32，自引：8，他引：24  

朱伟林  李建平  周心怀  郭永华 《沉积学报》2008,26(4):575-582

新近纪渤海具有构造稳定、沉降缓慢、湖泊水域范围大、内部无分割、地形平缓、坡度小等特点,广泛发育浅水三角洲,从而形成渤海海域新近系良好的储盖组合和优越的油气成藏条件。浅水三角洲砂岩储层由于受河流作用的控制,砂体具有明显的方向性,存在明显的分叉现象,与曲流河相比,砂体连通性较好,砂体等厚图呈典型的朵叶状。湖相厚层泥岩普遍发育,与浅水三角洲砂体组成多套垂向优质储盖组合。浅水三角洲发育于渤海新近纪至今处于生烃的峰期主力富烃凹陷的有利区带,新构造运动造成新近纪以来凹陷主力源岩生烃峰期与新构造运动的同步耦合,为渤海大型浅水三角洲成因的优质储层油气成藏创造了优越条件,可以形成大型油气田。因此,重视并充分挖掘渤海浅水三角洲储层类型油气藏的勘探潜力将是追求浅层优质油藏、进一步增储上产的方向所在。  相似文献   

厦门岛东海岸的蚀退与防护   总被引：5，自引：0，他引：5  

高智勇  蔡锋  和转  苏贤泽 《台湾海峡》2001,20(4):478-483

根据波浪输沙和地形对比，对厦门岛东部海岸的岸滩侵蚀动态及演变趋势进行探讨，并根据其海岸特点提出相应的防护对策。  相似文献   

波浪底摩擦力对重砂富集的影响——以鲁南近岸区为例     

金秉福 《海洋科学》1997,21(5):49-52

根据浅水波浪的底摩擦效应，对鲁南灵山湾和臼－岚山镇近岸区进行了波浪的海底摩擦力计算。波浪的海底摩擦力等值图与已知滨海锆石砂矿资料对比表明，底摩擦力大于０．１８Ｎ／ｍ＾２的动力分选区有利于重矿物砂富集。据此，进一步预测了鲁南近岸带的砂矿富集区。  相似文献   

海坛岛风沙表层沉积物的粒度分布特征   总被引：5，自引：0，他引：5  

陈方  李祖光 《台湾海峡》1993,12(4):385-392

本文对海坛岛风沙表层沉积物的粒度分布特征进行研究。结果表明：海坛岛风沙沉积物主要是由海岸带基岩和第四纪松散堆积物及闽江南下沿岸流所携带的泥沙，在海洋动力作用下堆积于海滩上，而后在强劲的ＮＮＥ向向岸盛行风作用下，海滩沙向陆搬运堆积而成的。风成沙的主要粒级为中沙，平均粒径为１．７３Ф；分选较好，标准差的平均值为０．６８，偏差多近于对称，偏态平均值为－０．０２；峰态窄，峰态平均值为１．２１。其搬运方式单  相似文献   

Rock magnetic record of Cenozoic lake sediments from the Linxia basin and aridification of the Asian inland   总被引：1，自引：0，他引：1  

Xianhai Xu  Xiaomin Fang 《Frontiers of Earth Science》2008,2(2):217-224

High resolution research of rock magnetic records and quartz sands from the Maogou Section in the Linxia basin reveals that after a relatively stable environment between 13.07 Ma and 8.6 Ma, the basin was gradually influxed by eolian dusts at about 8.6 Ma, with two rapid increases at about 6.4 Ma and 5.3 Ma, respectively. The study suggests that drying of northwest China began at 8.6 Ma and strengthened rapidly at about 6.4 Ma and 5.3 Ma. __________ Translated from Marine geology & Quaternary geology, 2007, 27(4): 103–110 [译自: 海洋地质与第四纪地质]  相似文献   

中国2010年上海世博会场址区地质环境条件分析与评价     

张鹏飞  史玉金  曾正强  严学新 《上海国土资源》2004,(4):1-6

文章在简要介绍世博会场址地质条件的基础上，分别分析了场址区流砂、软土和地下水等不良地质现象对工程建设的影响，然后评价了场址区天然地基工程、桩基工程以及地下工程建设的适宜性，为世博会场址区工程建设提供必要的地质依据。  相似文献   

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study   总被引：3，自引：0，他引：3  

Joanna E. Bullard  Grant H. McTainsh†  Christa Pudmenzky† 《Sedimentology》2004,51(5):1103-1125

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.  相似文献   

Multi‐year water balance assessment of a newly constructed wetland,Fort McMurray,Alberta          下载免费PDF全文

Erin M. Nicholls  Sean K. Carey  Elyn R. Humphreys  M. Graham Clark  Gordon B. Drewitt 《水文研究》2016,30(16):2739-2753

Oil sands mining in Alberta transforms the boreal landscape of forests and wetlands into open pits, tailings ponds and overburden piles. Whereas reclamation efforts have primarily focused on upland forests, rebuilding wetland systems has recently become a motivation for research. Wetland creation and sustainability in this region is complicated by the sub‐humid climate and salinity of underlying mining material. In 2012, Syncrude Canada Ltd. completed the construction of the Sandhill Fen Watershed (SFW), a 52‐ha upland‐wetland system to evaluate wetland reclamation strategies on soft tailings. SFW includes an active pumping system, upland hummocks, a fen wetland and underdrains. To evaluate the influence of management practices on the hydrology of the system, this study reports the water balance from January 2013 to December 2014, the first 2 years after commissioning. A semi‐distributed approach was taken to examine the fluxes and stores of water in uplands and lowlands. Natural and artificial inputs and outputs were measured using a series of precipitation gauges and pumps, and evapotranspiration was quantified using three eddy covariance towers. A series of near surface wells recorded water table position. Both 2013 and 2014 were normal rainfall years, with 2013 having more and 2014 less snow than normal. In 2013, inflow/outflow from pumping was the predominant hydrological fluxes, resulting in considerable variability in water table position and storage changes throughout the summer. In 2014, the artificial addition of water was negligible, yet the water table remained near the surface in lowland locations, suggesting that wetland conditions could be maintained under current conditions. Evapotranspiration rates between uplands and lowlands were similar between years and sites, ranging from 2.2 ± 1.8 to 2.5 ± 1.2 mm/day and were largely controlled by climate. These rates were less than nearby older upland systems, suggesting that water balance partitioning will change as vegetation develops. Comparison between years and with natural systems provides insight on how management practices influence hydrologic dynamics and the overall water balance of the SFW. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Simplified multi-block constitutive model predicting earthquake-induced landslide triggering and displacement along slip surfaces of saturated sand     

《Soil Dynamics and Earthquake Engineering》2014

Slopes consisting of saturated sand have recently moved down-slope tens or hundreds of meters under the action of earthquakes. This paper presents a simplified but accurate method predicting the triggering and displacement of such landslides. For this purpose, a simplified constitutive model simulating soil response of saturated sands along slip surfaces is proposed and validated. Then, this constitutive model is coupled with the multi-block sliding system model to predict the triggering and displacement of such slides. The multi-block model considers a general mass sliding on a trajectory which consists of n linear segments. The steps needed to apply this method are described in detail. The method was applied successfully to predict the triggering, the motion and the final configuration of the well-documented (a) Higashi Takezawa, (b) Donghekou and (c) Nikawa earthquake-induced slides.  相似文献